WL28e

Wacker Neuson Radlader WL28e mit Palettengabel im Einsatz

Standard Components

  • Battery (lithium-ion), 96 V, Battery capacity (gross) 14.1 kWh
  • Charger On-board 3 kW, Plug Type 2, Charging cable (Schuko) 230 V / 16 A
  • Drive Hydraulic Motor (ECE R085) 33.1 kW
  • Working hydraulics motor (ECE R085) 21.2 kW
  • Hydraulic articulated pendulum steering ±8°
  • Steering cylinder: 1
  • Operator's canopy with ROPS/FOPS-tested restraint system
  • Generous provision of space in all operator's cabs
  • Ergonomic, generous access
  • Adjustable steering column (inclination and height)
  • Fully damped comfort seat with safety belt, weight, back and height adjustment
  • LED lighting in accordance with the German Road Traffic Licensing Regulations (StVZO)
  • LED work lights, 2 in front, 1 in the rear on the roll bar
  • Axis: Planetary axis PA940
  • Drive: Electric drive, energy recovery during deceleration, direction of travel selectable via joystick, Auto / Eco Mode
  • Battery: internal battery heater, charging time from 20% to 80% SOC: 2.9 hours, charging enable switch
  • Speed: 15 km/h (optional: 20 / 25)
  • Speed settings: 2 10 mph / 15 mph
  • Service brake: Multi-disc brake on the front axle acting on the rear axle via a driveshaft
  • Parking brake: Electric parking brake with Auto-hold and Hill-hold functions (When stopped on a hill, the electric motor holds the machine in place)
  • 12–16.5 BKT SkidPower EM ET 0, EM tread pattern, width 1251 mm, height 2367 mm
  • Loading boom, lifting height 2560 mm
  • Hydraulic quick-change coupler (Wacker Neuson HV/HT - C)
  • Kinematics: P
  • Lifting cylinder: 2
  • Tilt cylinder: 1
  • Floating position for lift and tilt cylinders
  • Mechanically pilot controlled joystick with direction switch
  • 3rd Front control circuit via lever with single detent for continuous function
  • EquipCare (including the "Manager" app)

Options

  • Foldable driver's roll bar, EPS, ROPS/FOPS certified
  • Cabin with two-panel doors, including heating and ventilation
  • Cabin with two-panel doors, including heating and ventilation
  • Windshield and rear window, including front and rear windshield wipers 
  • Faux leather seats; air suspension (MSG 93)
  • Faux leather seats; air suspension; heated seats (MSG 93)
  • Seat fabric (standard for cabin) (MSG 83)
  • Fabric seats; air suspension (MSG 93)
  • Fabric seats; air suspension; heated seats (MSG 93)
  • Roof heating panel
  • DAB+ radio preparation (antenna, speakers)
  • Full DAB+ Radio
  • Roman shade
  • Headlight Protector
  • LED Performance work lights (2000 lm) on the roof, 2 in front, 2 in back
  • Preparation for the rotating beacon
  • LED rotating beacon (orange) National regulations must be followed!
  • Rotating beacon (orange) with magnetic base, National regulations must be observed!
  • Individual operating permit < 25 km/h
  • Small front and rear license plate holders
  • Triangular warning sign
  • Hand throttle

Axles

  • Planetary Axle PA940, Electric All-Wheel Drive, 100% Differential Lock

Travel speed

  • 20 km/h (speed increase)
  • 25 km/h (speed increase)
  • 31 x 15.50 - 15 BKT SkidPower HD ET0 (EM tread pattern, width 1,345 mm, height 2,351 mm) 
  • 31 x 15.50 - 15 BKT SkidPower HD ET-37 (EM profile, width 1,419 mm, height 2,351 mm)
  • 400 / 50 - 15 (31x15.5-15) Starco AS ET0 (AS profile, width 1,325 mm, height 2,346 mm)
  • 400 / 50 - 15 (31x15.5-15) Starco AS ET-37 (AS profile, width 1,399 mm, height 2,346 mm)
  • 31x15.5-15 BKT TracMaster ET0 (Profile AS, width 1,399 mm, height 2,346 mm)
  • 10-16.5 BKT Sure Trax HD ET40 (Sure Trax tread pattern, width 1,128 mm, height 2,349 mm)
  • 12-16.5 BKT Sure Trax ET45 (Sure Trax tread pattern, width 1,175 mm, height 2,350 mm)
  • 315/55R16 Continental MPT81 ET-30 (MPT81 tread pattern, width 1,305 mm, height 2,331 mm)

 

  • Lowering brake valve (pipe rupture safety device for lifting and tilting cylinders) includes neutral position
  • Load-induced vibration damping

Quick-change plates

  • SMS HV (hydraulic)
  • Kramer HV / WL - C (hydraulic)
  • Oil flow adjustment 3. Control circuit
  • Additional hydraulic oil cooler
  • Shell Panolin HLP Synth46 (Bio-hydraulic oil)
  • Hydraulic oil - Preheating
  • 3rd control circuit proportional incl. continuous function via switch, pressure release 3rd control circuit front on the charging system, oil volume adjustment (operation: Via scroll wheel in front on the joystick)
  • Pressureless return line in front (1 x Flatface size 3, plug) incl. leakage oil line (1 x Flatface size 2, plug)
  • Quick coupling Faster 2-fold - machine side
  • Quick coupling Faster 2-fold - machine side + attachment side
  • One double-acting hydraulic connection at the rear via a directional control valve (two SVK couplings, size 3), 3. Front or rear steering wheel, (Operation: Via switch (0–1) + 3. Control circuit)
  • Pressureless return line at the rear (1 x SVK size 3, plug) including drain line (1 x Flatface size 2, plug)
  • Li-ion battery, 18.0 kWh, 96 V
  • Li-ion battery, 28.0 kWh, 96 V
  • Onboard charger up to 6 kW (AC)

Machine-side charging cable, Type 2 (multiple selections allowed)

  • Grounded power plug (SchuKo) 230V/16A (Preselected), Can be deselected if no charging cable or a different charging cable is required.
  • CEE, 3-pin 230V/16A (blue)
  • CEE, 5-pin, 400 V/16 A (red)
  • Type 2 (IEC 62196)
  • EU Adapter Set (Schuko, 3-pin CEE, 5-pin CEE)

Battery charging enable

  • Lockable loading gate

front

  • 13-pin front socket (2x electrical functions E1/E2 and lighting), Operation: Using the two buttons on the joystick; 1. Function: Test, 2. Locking function

at the back

  • Rear 3-pin outlet, (2x electrical functions E3/E4, switchable to front outlet), Operation: Via switch; 1. Locking function, 2. Locking function
  • 7-pin rear power outlet for lighting on rear-mounted equipment
  • Rear cross-traffic alert (audible)
  • Rear Blue Safety Light
  • Immobilizer Ignition Key (Operation: (via a coded ignition key)
  • EquipCare Dual ID Keypad (Operation: (Via keypad)
  • Custom RAL single-color paint finish—instead of Wacker Neuson yellow
  • Custom RAL multi-color paint job (Excludes front and rear axles)
  • Floor plate counterweight (100 kg)
  • Toolbox, including tool set and hand lever grease press
  • Combination box (for combination envelope)
  • Combination bag (warning triangle / first aid kit)
  • Fully automatic central lubrication unit
  • K50 Ball-Head Trailer Hitch
  • 38 mm hitch, automatic
  • 38 mm hitch, automatic

Contact us

* Mandatory fields
Contact Contact

Contact

Phone number: +33 (0)1 60 62 30 00