How much energy can you save with a zero emission machine?
Our zero emission construction equipment is revolutionizing construction by enhancing both the efficiency of operations and environmental protection. But did you know that you can save a lot of energy cost and that running an electric machine is cheaper than operating a conventional alternative? So your zero emission machine is not only good for the environment and the operator but also for your business!
For example: With 500 operating hours on a WL28e, fuel costs of 1,60 € per liter and energy costs of 0,30 € per kWh (both average in Germany) you can save 2.220 € per year which equals 71 % energy cost reduction compared to the conventional WL28. For five years this means a saving of 11.100 €!
Get your energy saving calculation from our sales representative now.
Usually saves more than 50% of the energy costs with our zero emission compact equipment (depending on the input values).
Our calculation example for the WL28e. Get your example from your sales representative. Please fill out the contact form above.*
*All information and values are stated without liability.
Success Stories zero emission
Emission free.
100% CO₂-free operation on the construction site: This means zero emission machines
make a valuable contribution to climate protection. There is also less stress in the
construction site environment, as machine operation is very quiet and there are no CO₂
emissions.
#switchtogreen
Efficient.
Electric motors are more efficient than combustion engines, and particularly low-maintenance. The extended range of applications also increases the utilization and therefore the economic efficiency of the machines. Even the CO₂-reduction has financial benefits, because to achieve the specified climate goals, many countries will significantly increase the already implemented CO₂-taxes in the coming years.
#switchtoeconomical
Easy to operate.
Our zero emission products are simple and intuitive to use and can be charged at any outlet and/or put into operation immediately using a battery. The construction machines start at the push of a button. Full power is immediately available on all zero emission models. Depending on the application, a single battery charge may be sufficient for a typical workday.
#switchtoeasy
